Powered by Blogger.

RUMUS-RUMUS TEKNIK SIPIL / rumus rab

RUMUS-RUMUS TEKNIK SIPIL & PERATURAN BEBAN

> UMUM :

> BETON :


  • Konversi K – fc’, kuat tekan variasi tinggi/diameter, kuat tekan terhadap umur beton [View] [Download]
  • Berat, luas & sifat mekanis tulangan [View] [Download]
  • Tipe semen PC, jumlah sampel, slump, diameter agregat [View] [Download]
  • Kombinasi pembebanan, faktor reduksi kekuatan, faktor Beta-1 [View] [Download]
> BAJA :

  • Mutu baja, kombinasi beban, batas lendutan, faktor reduksi [View] [Download]
> GEMPA :

19. Spreadsheet Excell Perhitungan Struktur Beton
20. Spreadsheet Excell Perhitungan Jembatan
21. Spreadsheet Excell Perhitungan Kuda- kuda Baja Ringan :
22. Tabel Profil Baja (Excel)
23. Kumpulan Materi Seminar HAKI (Himpunan Ahli Konstruksi Indonesia)

24.
STRUCTURAL STEEL DESIGNER’S HANDBOOK
SNI GEDUNG

SNI JEMBATAN

PEDOMAN PERENCANAAN BANGUNAN AIR
  • KP – 01 Kriteria Perencanaan-Bagian Perencanaan Jaringan Irigasi.
  • KP – 02 Kriteria Perencanaan-Bagian Bangunan Utama.
  • KP – 03 Kriteria Perencanaan-Bagian Saluran.
  • KP – 04 Kriteria Perencanaan-Bagian Bangunan.
  • KP – 05 Kriteria Perencanaan-Bagian Petak Tersier.
  • KP – 06 Kriteria Perencanaan-Bagian Parameter Bangunan.
  • KP – 07 Kriteria Perencanaan-Bagian Standar Penggambaran.
ONLINE REFERENCE


SLAB ON GRADE

REFERENCE


Link pada artikel lain yang terkait dengan tema di atas

FEMA (Federal Emergency Management Agency)


ASTM (American Society of Testing Material Engineers)
  • ASTM A 6/A 6M – 04a :
    Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
    (
    Download PDF size 357 kb)
  • ASTM A 36/A 36M – 04 :
    Standard Specification for Carbon Structural Steel
    (
    Download PDF size 23 kb)

ASCE (American Society of Civil Engineers)
  • Guide to the Use of the Wind Load Provision of ASCE 7-02
    published by th American Society of Civil Engineers
    138 pages (
    download file size 15 Mb )

ACI (American Concrete Institute)
  • ACI 351.3R-04 : Foundations for Dynamic Equipment,
    Reported by ACI Committee 351
    This report presents to industry practitioners the various design criteria and methods and procedures of analysis, design, and construction applied to dynamic equipment foundations.
    (
    download *.RAR 636 kb)
  • ACI 318-08 : Building Code Requirements for Structural Concrete and Commentary
    An ACI Standard, Reported by ACI Committee 318
    (
    down-load PDF 16.463 Mb)
  • ACI 315-99 : Details and Detailing of Concrete Reinforcement
    Reported by ACI Committee 315
    This document provides standards of practice for both the architect/engineer (A/E) and reinforcing steel detailer in showing reinforcing steel details. It is divided into three parts: one addressed to the A/E, one for the detailer, and a third providing a reference table and figures. It defines the responsibilities of both the A/E and detailer. It then establishes certain standards of practice for both the structural and placing drawings.
    (
    down-load PDF 859 KB)
  • ACI 318M-05 : Building Code Requirements For Structural Concrete And Commentary
    ACI 318M-05 is a complete metric companion to ACI 318-05. ACI 318-05 is deemed to satisfy ISO 19338, “Performance and Assessment Requirements for Design Standards on Structural Concrete,” Reference Number ISO 19338.2003(E). Also Technical Corrigendum 1: 2004.
    (
    down-load PDF 9.06 Mb)
  • ACI 336.2R : Suggested Analysis and Design Procedures for Combined Footings and Mats)
    MCP06.part1.rar
    MCP06.part2.rar
    MCP06.part3.rar
    MCP06.part4.rar

Eropa British dan sebangsanya
National Standard of the Peoples Republic of China

AISC – STEEL DESIGN GUIDE

RUMUS-RUMUS TEKNIK SIPIL & PERATURAN BEBAN

> UMUM :

> BETON :


  • Konversi K – fc’, kuat tekan variasi tinggi/diameter, kuat tekan terhadap umur beton [View] [Download]
  • Berat, luas & sifat mekanis tulangan [View] [Download]
  • Tipe semen PC, jumlah sampel, slump, diameter agregat [View] [Download]
  • Kombinasi pembebanan, faktor reduksi kekuatan, faktor Beta-1 [View] [Download]
> BAJA :

  • Mutu baja, kombinasi beban, batas lendutan, faktor reduksi [View] [Download]
> GEMPA :

19. Spreadsheet Excell Perhitungan Struktur Beton
20. Spreadsheet Excell Perhitungan Jembatan
21. Spreadsheet Excell Perhitungan Kuda- kuda Baja Ringan :
22. Tabel Profil Baja (Excel)
23. Kumpulan Materi Seminar HAKI (Himpunan Ahli Konstruksi Indonesia)

24.
STRUCTURAL STEEL DESIGNER’S HANDBOOK
SNI GEDUNG

SNI JEMBATAN

PEDOMAN PERENCANAAN BANGUNAN AIR
  • KP – 01 Kriteria Perencanaan-Bagian Perencanaan Jaringan Irigasi.
  • KP – 02 Kriteria Perencanaan-Bagian Bangunan Utama.
  • KP – 03 Kriteria Perencanaan-Bagian Saluran.
  • KP – 04 Kriteria Perencanaan-Bagian Bangunan.
  • KP – 05 Kriteria Perencanaan-Bagian Petak Tersier.
  • KP – 06 Kriteria Perencanaan-Bagian Parameter Bangunan.
  • KP – 07 Kriteria Perencanaan-Bagian Standar Penggambaran.
ONLINE REFERENCE


SLAB ON GRADE

REFERENCE


Link pada artikel lain yang terkait dengan tema di atas

FEMA (Federal Emergency Management Agency)


ASTM (American Society of Testing Material Engineers)
  • ASTM A 6/A 6M – 04a :
    Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
    (
    Download PDF size 357 kb)
  • ASTM A 36/A 36M – 04 :
    Standard Specification for Carbon Structural Steel
    (
    Download PDF size 23 kb)

ASCE (American Society of Civil Engineers)
  • Guide to the Use of the Wind Load Provision of ASCE 7-02
    published by th American Society of Civil Engineers
    138 pages (
    download file size 15 Mb )

ACI (American Concrete Institute)
  • ACI 351.3R-04 : Foundations for Dynamic Equipment,
    Reported by ACI Committee 351
    This report presents to industry practitioners the various design criteria and methods and procedures of analysis, design, and construction applied to dynamic equipment foundations.
    (
    download *.RAR 636 kb)
  • ACI 318-08 : Building Code Requirements for Structural Concrete and Commentary
    An ACI Standard, Reported by ACI Committee 318
    (
    down-load PDF 16.463 Mb)
  • ACI 315-99 : Details and Detailing of Concrete Reinforcement
    Reported by ACI Committee 315
    This document provides standards of practice for both the architect/engineer (A/E) and reinforcing steel detailer in showing reinforcing steel details. It is divided into three parts: one addressed to the A/E, one for the detailer, and a third providing a reference table and figures. It defines the responsibilities of both the A/E and detailer. It then establishes certain standards of practice for both the structural and placing drawings.
    (
    down-load PDF 859 KB)
  • ACI 318M-05 : Building Code Requirements For Structural Concrete And Commentary
    ACI 318M-05 is a complete metric companion to ACI 318-05. ACI 318-05 is deemed to satisfy ISO 19338, “Performance and Assessment Requirements for Design Standards on Structural Concrete,” Reference Number ISO 19338.2003(E). Also Technical Corrigendum 1: 2004.
    (
    down-load PDF 9.06 Mb)
  • ACI 336.2R : Suggested Analysis and Design Procedures for Combined Footings and Mats)
    MCP06.part1.rar
    MCP06.part2.rar
    MCP06.part3.rar
    MCP06.part4.rar

Eropa British dan sebangsanya
National Standard of the Peoples Republic of China

AISC – STEEL DESIGN GUIDE
RUMUS-RUMUS TEKNIK SIPIL / rumus rab 4.5 5 Ayub Pujiyanto RUMUS-RUMUS TEKNIK SIPIL / rumus rab RUMUS-RUMUS TEKNIK SIPIL & PERATURAN BEBAN > UMUM : Peraturan Pembebanan Gedung 1987 [ View ] [ Download ] Data Material &...


,

If you enjoyed this article, sign up for free updates.

author picture

About Author

I'am Ayub Pujiyanto, a part-time blogger and template designer from Indonesia who is the founder And Author of UD AURELIA SANJAYA devisi Solo Area. I love create Blogger Themes, write about blog design, And Blogspot tweaks. You can subscribe me on G+ @ Ayub Pujiyanto .

No comments

Artikel Bangunan

Translate